When we put a connection through WiFi in our house, we hope that in all instances the signal arrives well and that we have enough speed to be able to function with our devices with ease. Unfortunately this does not always happen, so we have no other solution than to put a repeater. But this can raise the question of where to place it and how to configure it. Well, we are going to explain it to you.
Once we have our WiFi network at home, it is time to check if all rooms have a good signal and enough power to enjoy the Internet fluently.
But it has happened to all of us that it turns out that in a room or area of the home the signal is weaker and therefore the fiber with so many megabytes that we have contracted, remains extremely reduced.
In these cases the best solution is to put a repeater to get the signal from the router to reach us with the maximum possible power, since it is useless to have 500 megabytes contracted, if in the room where we have the computer we only get 100, for example.
The fact of putting a repeater, especially if it is the first time, always leads to several doubts about its configuration, but especially about the place where we should put it. If this is something that happens to you, it is best to keep reading.
Where should we place the WiFi repeater
It is very important that the repeater is in the best possible location to be able to emit the router signal and thus have the maximum bandwidth that is possible.
This is not a precisely fast process, since you will have to carry out tests in one place or another until you find the exact one, but it is best to have certain guidelines to achieve it.
Before we start looking for where to place the repeater, it is convenient to move the router, as far as possible, to the area where best signal send to the rest of the house.
With this we are going to get the router have as much strength as possible in the house and place the repeater in the most suitable place to ensure that the rest of the instances benefit from the speed of our connection.
WiFi repeaters are easily installed, help eliminate dead spots and increase the speed of your current internet connection without having to spend a lot.
Router and repeater
We must be clear that the repeater cannot be in an area where the router loses signal, that is, if we know that the signal does not arrive clearly in the hall, the repeater cannot be there, since much efficiency will be lost.
We must always look for a place where the sign arrive with full power. That place should be as close as possible to the area where coverage is lost.
This is not an easy job, but we can use our own mobile devices to see where, more or less, is the zone where the router no longer has the same strength.
As central as possible
If we have to service several rooms that do not have a good signal, the repeater must be in a middle point between them.
We must be aware that the more oriented is towards the middle of the zone where we must increase the power of the WiFi, the better the wireless signal is going to be distributed, which will mean that all those rooms will benefit equally.
If it is only one that does not get the signal, all we have to do is place the repeater the closest to the room, but without forgetting the area where the router no longer broadcasts with power.
High and without interference
It would be best to have the repeater highest possibleBecause if it is too low, you may experience more interference than if it is high up.
But not everything is the elevation, since we should be clear that the repeater you don’t have to be in an area where there are no other devices excessively close, since in that case interference could be unavoidable.
Avoid areas with less signal
As we have already commented, we should not put it never in the area where the router loses signal, since these devices what they do is repeat what the router emits, so, if there is not good coverage, the repeater will not have it either.
Placing this device in such an area is as if we did nothing, since we will have exactly the same problem as if we only used the router.
These 4G routers are compact and use 4G networks to give you WiFi connection to various devices, they are cheap and perfect for travelers.
When we have the perfect location
Once we have managed to find the perfect location for our repeater, it is the moment in which we must take into account other types of recommendations.
These tips are given so that we do not lose any of the signal that has been so difficult to find, since now that the repeater is in the best area.
If we can, it is convenient to do the following:
Connect our device by cable: This would be a very good thing, since, as you well know, when connecting via WiFi, data transfer speed is lost, so if we can connect, for example, the computer to the repeater by cable there will be almost no loss. Bands: Whenever we use the WiFi to connect to the repeater, we must try to use the 5 GHz band, since it is the fastest, although the one with the least signal. Password: something that you should not forget is the fact of putting a password to the repeater itself to prevent anyone from sneaking into it. This is done if this device has its own network.
Set up a repeater
The normal way to configure a repeater is to follow a few steps that are usually common in the vast majority of these types of devices.
We can get an idea with the following:
We plugged in the WiFi repeater to the electrical network. Now we must detect the repeater network with the device we want, either a computer or a smartphone. Although the network almost always leaves without a password, it may be the case that it comes with one, in which case we must consult the instructions of the device. When trying to access any website, we should skip the repeater configuration program. We follow the instructions knowing that at some point it will ask us for the password of our WiFi network, so we must have it on hand.
If our router has the button called WPS, the connection process varies slightly and becomes more intuitive and with fewer steps.
This is what to do:
We plugged in the repeater to the mains as close as possible to the router. If the repeater’s WiFi light is working, it’s time to press the WPS button on the router for a few seconds, and then press the repeater for about 10 seconds. Now we just have to wait for both devices are paired. Once done you can put the repeater in the place where you will stay.
Maybe you expected that the task of configuring a repeater was going to be complicated, although you have already seen that it is not. Where there can be more difficulty is in finding the perfect place or the closest thing in the placement of the repeater.
Basically it is to arm yourself with patience and carry out many tests until the device is in the ideal position to be able to enjoy your Internet connection.